NBR 14136 2-Pin Plug Power Cord and EU 2-Pin Plug Power cord may look similar at first glance, but they are designed for different markets and follow different technical requirements. The main differences include pin geometry, plug dimensions, applicable standards, and certification requirements.
For importers, distributors, and electrical equipment manufacturers, understanding these differences is important when selecting power cords for the Brazilian or European market.
Pin Design and Spacing: Brazilian 2-Pin Plug vs. European Type C Europlug
Brazilian and European 2-pin plugs may look similar, but their pin configurations differ in both spacing and design.
Brazilian 2-pin plugs feature two parallel round pins. The 10A Type N version has a pin spacing of 19 mm, with a pin diameter of 4.0 mm.
European Type C Europlugs use two round pins with a nominal pin spacing of approximately 17–18 mm. Depending on the specific plug design, the pins may appear slightly inward-angled.
These dimensional and structural differences are important when matching a power cord to its intended socket system. Brazilian and European 2-pin plugs should not be assumed to be interchangeable.
Standards and Certification Requirements
Brazilian and European 2-pin plugs follow different standards and conformity requirements.
NBR 14136 2-Pin Plug Power cord
Brazilian plugs are subject to Brazil’s national plug and socket system. INMETRO conformity requirements are important for products covered by the applicable Brazilian regulations.
Relevant standards include:
- ABNT NBR NM 60884-1: General requirements for plugs and socket-outlets for household and similar purposes.
- ABNT NBR 14136: Brazilian standard for plug and socket configurations.
The applicable standard edition and certification scope should be confirmed for the specific product and current regulatory requirements.
EU 2-Pin Plug Power cord
The European 2-pin Europlug is associated with the EN 50075:1990 standard.
This standard covers flat, non-rewirable, two-pole plugs rated at 2.5A and 250V, supplied with a cord and intended for Class II household and similar equipment.
Depending on the product and target market, relevant conformity marks or third-party certifications may include:
- VDE
- KEMA-KEUR
- ENEC
- CE marking, where applicable under relevant EU legislation
These marks do not all represent the same type of certification. Buyers should check the actual certificate, product model, and applicable requirements before sourcing.
Brazilian 2-Pin Plug vs. European 2-Pin Plug: Comparison
| Specification | Brazilian 2-Pin Plug | European 2-Pin Plug |
|---|---|---|
| Common name | Brazilian 2-pin plug | Europlug |
| Pin configuration | Two straight, parallel pins | Two round pins with inward-angled configuration |
| Target market | Brazil | Compatible European markets |
| Main standard references | ABNT NBR NM 60884-1; ABNT NBR 14136 | EN 50075:1990 |
| Certification / conformity | INMETRO, where required | VDE, KEMA-KEUR, ENEC, CE marking where applicable |
| Compatibility | Brazilian compatible sockets | Compatible European sockets |
Compatible Wire Types and Gauge Options
The following wire gauge chart outlines the available cable types, conductor sizes, and wire configurations for our Brazilian and European 2-pin power cords, helping buyers select the right specifications for their applications.
The Brazilian 2-pin plug is also available in a 2.5A version, compatible with both flat and round cables featuring 2 × 0.5 mm² pure copper conductors.
Why Plug Compatibility Matters for Power Cord Sourcing
Choosing the correct plug is essential when sourcing power cords for different international markets.
A plug designed for Brazil should not be substituted with a European 2-pin plug simply because both have two pins. Differences in pin geometry, dimensions, and applicable technical requirements can affect socket compatibility and product compliance.
For B2B buyers, the plug design, cable specification, rated voltage, rated current, and certification scope should all be confirmed before mass production.
SEBLIP Brazilian and European Power Cord Manufacturing
SEBLIP supplies power cords for different international markets, including Brazilian and European plug configurations. We support OEM and ODM customization for plug design, cable type, conductor size, cable length, color, and private-label requirements.
With 20+ years of manufacturing experience and a 40,000 m² manufacturing facility, our integrated production capabilities cover wire processing, cable production, injection molding, plug assembly, and quality inspection.
Whether you are sourcing Brazilian 2-pin power cords or European 2-pin Europlug power cords, SEBLIP can support product customization based on your technical specifications and target-market requirements.
In addition to Brazilian and European 2-pin power cords, SEBLIP also manufactures a wide range of electrical products, including extension cords, power strips, USB chargers, and IEC power cord connectors and components. We provide flexible OEM/ODM customization to support different product specifications and market requirements. Contact SEBLIP to explore our complete product range and discuss your sourcing needs.
Frequently Asked Questions About Brazilian and European 2-Pin Power Cords
Q: What certifications are required for Brazilian 2-pin power cords?
A: Brazilian 2-pin power cords may require INMETRO certification according to the applicable Brazilian regulations. Buyers should verify the certification status and scope of the specific plug and power cord model before purchasing.
Q: What certifications are available for European 2-pin Europlugs?
A: Depending on the product model, European 2-pin Europlugs may carry VDE, KEMA-KEUR, or ENEC certification. CE marking may also apply where required by relevant EU legislation. Certification details should be checked against the specific product documentation.
Q: What is the minimum order quantity (MOQ) for Brazilian and European 2-pin power cords?
A: Our standard MOQ is 100 pieces. For customized orders involving plug designs, cable specifications, or other requirements, please contact our sales team to confirm the order quantity.
Q: Can I request free samples before placing a bulk order?
A: Yes. We provide free samples for product quality evaluation and technical verification. Please contact our sales engineering team to confirm sample specifications and arrangement.